Fix Your Stuff Community Store

Changes to Step #2

Edit by David Hodson —

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Gently lift the bottom of the case from the device.
-[* icon_caution] There are still two cables connecting the mother board to the case, so be sure not to pull the case all the way off.
-[* black] Use a plastic opening tool to gently lift the two connectors from the motherboard.
+[* black] Lift the bottom edge of the lower case off the rest of the 3DS.
+[* icon_caution] There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off.
+[* black] Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.
[* black] Remove the lower case from the device.