Skip to main content

Changes to Step #5

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.
[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.