Skip to main content

Changes to Step #1

Edit by Kelsea Weber

Edit approved by Kelsea Weber

Before
After
Unchanged

Step Lines

[* black] Orient the camera so the lens assembly faces to the left.
[*
black] Use a Phillips #00 screwdriver to remove the two 1.6 mm screws on the rightleft hand side of the cameracamera, holding a metal clip in place.
[* black] Orient the camera so the lens assembly faces to the left.
[*
black] Use a Phillips #00 screwdriver to remove the two 1.6 mm screws on the rightleft hand side of the cameracamera, holding a metal clip in place.