Skip to main content

Changes to Step #1

Edit by Kelsea Weber

Edit approved by Kelsea Weber

Before
After
Unchanged

Step Lines

[* redblack] Orient the camera so the lens assembly faces to the left.
[* black
] Use a Phillips #00 screwdriver to remove the two 1.6 mm screws on the right side of the cameracamera holding a metal clip in place.
[* redblack] Orient the camera so the lens assembly faces to the left.
[* black
] Use a Phillips #00 screwdriver to remove the two 1.6 mm screws on the right side of the cameracamera holding a metal clip in place.

Image 1

Old Version

New Version

Image 2

Deleted