Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #11

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Gently grasp the display assembly and lift it up to open the phone, using the clips at the top of the front panel as a hinge.
[* icon_caution] Remember not to open the phone past 90 degrees, in order to avoid damaging[* black] Open the display cables.
[* black] Hold the display or prop
to about a 90º angle, and lean it up against something to keep it open at approximately 90 degreespropped up while you're working on the phone.
[* black] Add a rubber band to keep the display securely in place
while you work. This prevents undue strain on the display cables.
[* icon_note] In a pinch, you can use an unopened canned beverage to hold the display.
[* icon_caution] Remember not to open the phone past 90 degrees, in order to avoid damaging[* black] Open the display cables.
[* black] Hold the display or prop
to about a 90º angle, and lean it up against something to keep it open at approximately 90 degreespropped up while you're working on the phone.
[* black] Add a rubber band to keep the display securely in place
while you work. This prevents undue strain on the display cables.
[* icon_note] In a pinch, you can use an unopened canned beverage to hold the display.

Image 3

No previous image

Added