Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #6

Edit by palbarede

Pending approval

Before
After
Unchanged

Step Lines

[* black] Peel up the two pieces of foil tape on the left side of the keyboard area.
[* icon_caution] The connectors at the ends of the cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
[* black] Carefully disconnect the microphone and power cables from the logic board. Using your fingernails orhave a dental pick, carefully pry the connectors from their sockets. Make sure you're pulling only on the connector and not on the socket.coffe
[* black] Carefully disconnect the microphone and power cables from the logic board. Using your fingernails orhave a dental pick, carefully pry the connectors from their sockets. Make sure you're pulling only on the connector and not on the socket.coffe