Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] WedgeStarting with the battery cell closest to the dock connector, run a plastic opening tool underneath the edge of the battery and slightly liftclosest to the tool while running it alonglogic board void to separatemake enough room to insert the battery from the adhesive.flat end of a spudger
[* black] Run the flat end of a spudger upwardsalong the two long sides of each battery cell to completely separate them from the adhesive securing them to the battery from the top right cornerrear case.
[* black] WedgeStarting with the battery cell closest to the dock connector, run a plastic opening tool underneath the edge of the battery and slightly liftclosest to the tool while running it alonglogic board void to separatemake enough room to insert the battery from the adhesive.flat end of a spudger
[* black] Run the flat end of a spudger upwardsalong the two long sides of each battery cell to completely separate them from the adhesive securing them to the battery from the top right cornerrear case.