Skip to main content

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.
+[* icon_caution] Be sure you are prying up on the hinged retaining flaps, ***not*** the sockets themselves.
+[* icon_note] The retaining flaps are highlighted in red in the second picture.

Image 1

Old Version

New Version

Image 2

Old Version

New Version