Skip to main content

Changes to Step #10

Edit by MissHeather

Edit approved by MissHeather

Before
After
Unchanged

Step Lines

[title] Remove front screen
[* black] Apply a heat gun or iOpener to front of screen to allow it to warm up the glue.
[* black] Use opening tool and work your way around the front of the screen. You may have to alternate applying to heat to get it loose enough to separate.
[* black] Be careful not overdue the heat. Use a low temperature and take your time to separate the screen.
-[* black] Attach new screen to black backing.
+[* black] Clean the black backing off of any glass still sticking to it. Mine had a lot so I had to scrape for awhile to get all the little pieces off to have a clean surface to apply the new replacement screen.
+[* black] Apply new screen to black backing.