Skip to main content

Changes to Step #10

Edit by MissHeather

Edit approved by MissHeather

Before
After
Unchanged

Step Lines

+[title] Remove front screen
+[* black] Apply a heat gun or iOpener to front of screen to allow it to warm up the glue.
+[* black] Use opening tool and work your way around the front of the screen. You may have to alternate applying to heat to get it loose enough to separate.
+[* black] Be careful not overdue the heat. Use a low temperature and take your time to separate the screen.
+[* black] Attach new screen to black backing.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added