Skip to main content

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

+[* black] Remove the following 3 screws:
+ [* red] Two 3 mm Phillips near the right speaker.
+ [* orange] One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.
+[* icon_reminder] Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack.
+[* icon_note] Santa Rosa and Penryn MacBooks do not have a C-Channel. If you are disassembling either of these models, remove only the 3 mm Phillips screw from the right speaker and skip step 26.

Image 1

No previous image

Added