Skip to main content

Changes to this Step

Edit by Richard Bellizzi

Edit approved by Richard Bellizzi

Before
After
Unchanged

Step Lines

-[* black] Use a T5 Torx Screwdriver to unscrew the screw that is circled at the top middle.
-[* black] Use a spudger to disconnect the 2 ribbon cables on the left.
-[* black] Use a spudger to disconnect the keyboard connection near the bottom middle.
+[* red] Use a T5 Torx Screwdriver to unscrew the screw that is circled at the top middle.
+[* orange] Use a spudger to disconnect the 2 ribbon cables on the left.
+[* yellow] Use a spudger to disconnect the keyboard connection near the bottom middle.
[* icon_note] This is where you would replace the motherboard.

Image 1

Old Version

New Version