Skip to main content

Changes to Step #3

Edit by johnsawyercjs

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following 3 screws:
[* red] Two 97.5 mm Phillips from either end of the left I/O frame.
[* orange] One 7.59 mm Phillips from the middle of the left I/O frame.
[* red] Two 97.5 mm Phillips from either end of the left I/O frame.
[* orange] One 7.59 mm Phillips from the middle of the left I/O frame.
[* black] Remove the small black plastic spacer at the bottom of the left I/O frame.