Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #10

Edit by Lauren Newcomer

Edit approved by Lauren Newcomer

Deleted
Added
Unchanged

Step Lines

[* black] Remove the large wire ribbon located under the screw removed in step seven.
[* black] Gently wiggle the ribbon in an upward motion.
[* black] This should be done by adjusting a pair of needle nose tweezers horizontally in order to grasp a greater surface area. This will increase a safer amount of leverage needed to remove ribbon.
[* icon_note] YouFor easier access, you can push the black part of the camera where the buttons and dials are for easier accessare. Just be sure not to push too hard as it may break the plastic.
[* icon_note] YouFor easier access, you can push the black part of the camera where the buttons and dials are for easier accessare. Just be sure not to push too hard as it may break the plastic.