Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #10

Edit by Jesse Johnson

Edit approved by Jesse Johnson

Deleted
Added
Unchanged

Step Lines

[* black] Use needle noseneedle-nose tweezers to remove the large wire ribbon located under the screw. Gently wiggle the ribbon out in an upward motion.
[* black] Use needle noseneedle-nose tweezers to remove the large wire ribbon located under the screw. Gently wiggle the ribbon out in an upward motion.
[* icon_note] For easier access, you can push the black surface of the camera where the buttons and dials are located. Do not push too hard as this may break the plastic.