Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #10

Edit by Jesse Johnson

Edit approved by Jesse Johnson

Deleted
Added
Unchanged

Step Lines

[* black] Remove theUse needle nose tweezers to remove the large wire ribbon located under the screw removed in step seven.
[* black]
screw. Gently wiggle the ribbon out in an upward motion by using a pair of needle nose tweezers. Position the tweezers horizontally to grasp a greater surface areamotion.
[* icon_note] For easier access, you can push the black partsurface of the camera where the buttons and dials are. Just be sureare located. Do not to push too hard as itthis may break the plastic.
[* black] Remove theUse needle nose tweezers to remove the large wire ribbon located under the screw removed in step seven.
[* black]
screw. Gently wiggle the ribbon out in an upward motion by using a pair of needle nose tweezers. Position the tweezers horizontally to grasp a greater surface areamotion.
[* icon_note] For easier access, you can push the black partsurface of the camera where the buttons and dials are. Just be sureare located. Do not to push too hard as itthis may break the plastic.