Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #10

Edit by Alexis Soule

Edit approved by Kristen Gismondi

Deleted
Added
Unchanged

Step Lines

[* black] Remove the large wire ribbon located under the screw removed in step seven.
[* black] Gently wiggle the ribbon in an upward motion.
[* black] This should be done
motion by adjustingusing a pair of needle nose tweezers. Position the tweezers horizontally in order to grasp a greater surface area. This will increase a safer amount of leverage needed to remove ribbon.
[* black] Gently wiggle the ribbon in an upward motion.
[* black] This should be done
motion by adjustingusing a pair of needle nose tweezers. Position the tweezers horizontally in order to grasp a greater surface area. This will increase a safer amount of leverage needed to remove ribbon.
[* icon_note] For easier access, you can push the black part of the camera where the buttons and dials are. Just be sure not to push too hard as it may break the plastic.