Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #8

Edit by Jesse Johnson

Edit approved by Jesse Johnson

Deleted
Added
Unchanged

Step Lines

[* black] With a pair ofred] Use needle nose tweezers, verytweezers to gently lift the black/grey latch towards the wire ribbon (the plastic latch rotates upward to release and snaps down to lock, be verylock).
[* icon_caution] Be
careful not to break this latch as itthe latch. It cannot be replaced)replaced.
[* black] After opening black/grey latch proceedUse tweezers to gently remove wire ribbon with needle nose tweezersribbon-wires.
[* black] Pull the wire ribbonribbon-wires towards the back endback-end of the camera.
[* black] Repeat the process with the larger wire ribbon.
[* black] With a pair ofred] Use needle nose tweezers, verytweezers to gently lift the black/grey latch towards the wire ribbon (the plastic latch rotates upward to release and snaps down to lock, be verylock).
[* icon_caution] Be
careful not to break this latch as itthe latch. It cannot be replaced)replaced.
[* black] After opening black/grey latch proceedUse tweezers to gently remove wire ribbon with needle nose tweezersribbon-wires.
[* black] Pull the wire ribbonribbon-wires towards the back endback-end of the camera.
[* black] Repeat the process with the larger wire ribbon.