Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #8

Edit by Stephen Lee

Edit approved by Stephen Lee

Before
After
Unchanged

Step Lines

[* black] Your next step will be to remove the two yellow electricalwire ribbons seen in this photo.
[* orangeblack] With a pair of needle nose tweezers lift the whiteblack/grey latch open towards the electricalwire ribbon.
[* black] After opening whiteblack/grey latch proceed to gently remove electricalwire ribbon with needle nose tweezers.
[* black] The electricalPull the wire ribbon fastened with white latch should slide right towards the hingeback end of the camera allowing you to disconnect the ribboncamera.
[* black] You should now removeRepeat the process with the larger electricalwire ribbon.
[* black] Gently wiggle large electrical ribbon to the right towards camera hinge
[* black] Your next step will be to remove the two yellow electricalwire ribbons seen in this photo.
[* orangeblack] With a pair of needle nose tweezers lift the whiteblack/grey latch open towards the electricalwire ribbon.
[* black] After opening whiteblack/grey latch proceed to gently remove electricalwire ribbon with needle nose tweezers.
[* black] The electricalPull the wire ribbon fastened with white latch should slide right towards the hingeback end of the camera allowing you to disconnect the ribboncamera.
[* black] You should now removeRepeat the process with the larger electricalwire ribbon.
[* black] Gently wiggle large electrical ribbon to the right towards camera hinge

Image 1

Old Version

New Version