Skip to main content

Changes to Step #3

Edit by Jake Dykeman

Edit declined by Scott Havard

Before
After
Unchanged

Step Lines

[* black] Remove the four T15 torx screws.
-[* black] Set the unit on it's base, grasp the neck and tilt it to separate the base.
+[* black] Set the unit on it's base, grasp the neck and tilt it to separate the base.dsgjhdfhkjrdhgfkjbshekgsvkjghsdkjghvdnskgdfkghsierughvn4985yt98v4nw489ve4c