Skip to main content

Changes to Step #8

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* red] Remove the 2 mm Phillips #00 screw securing the optical drive.
-[* icon_note] The Bluetooth cable may be covering the screw; carefully push it aside* before removing the screw.
-[* black] *I found it necessary to unscrew the amber cable clip seen in the photo. - AJM
+[* orange] The Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to unscrew the cable clip to free the cable enough.

Image 1

Old Version

New Version