Skip to main content

Changes to Step #5

Edit by Kevin

Edit approved by Kevin

Deleted
Added
Unchanged

Step Lines

[* black] If Step 4 was done correctly, the board should dislodge from the corner mold. (See picture for reference)
[* blackred] Once the corner has been popped out, the rest of the board can be removed by pulling up.
[* blackblue] Lastly, the small narrow end of the board will need to be pulled horizontally towards the corner. This should completely free the board from the panel with the exception of the connector. (See image)
[* blackred] Once the corner has been popped out, the rest of the board can be removed by pulling up.
[* blackblue] Lastly, the small narrow end of the board will need to be pulled horizontally towards the corner. This should completely free the board from the panel with the exception of the connector. (See image)