Skip to main content

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereUse the tip of a spudger to pull the right speaker/subwoofer cable out from under the retaining finger molded into the upper case.
[* black] Pull the right speaker/subwoofer cable upward to lift the connector out of its socket on the logic board
.
[* black] Insert wisdom hereUse the tip of a spudger to pull the right speaker/subwoofer cable out from under the retaining finger molded into the upper case.
[* black] Pull the right speaker/subwoofer cable upward to lift the connector out of its socket on the logic board
.