Skip to main content

Changes to Step #11

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Open the iPhone by lifting the home button end of the display assembly away from the rear case, using the top of the phone as a hinge.
- [* icon_caution] Don't open the display more than 90 degrees—it is still connected to the top of the phone by the display, digitizer, and front camera cables which can tear easily.
+[* black] Gently grasp the display assembly and lift it up to open the phone, using the clips at the top of the front panel as a hinge.
+[* black] Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.
+ [* icon_caution] Don't open the display more than 90º—it is still connected to the top of the phone by the display, digitizer, and front camera cables which can tear easily.
+ [* black] Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.
+ [* icon_note] In a pinch, you can use an unopened canned beverage to support the display.

Image 3

No previous image

Added