Skip to main content

Changes to Step #1

Edit by Eric J

Edit approved by Walter Galan


Step Lines

[* red] Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.
[* black] Transfer the hard drive retaining posts to your new hard drive.
[* icon_note] If desired, transfer the pull tab over to your new hard drive.
[* icon_reminder] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.
[* black] If you upgraded your [|EFI Firmware ROM] you can also perform an [|internet recovery] to your most recently install operating system such as OSX 10.9 Mavericks.