Skip to main content

Changes to Step #3

Edit by Kelsea Weber

Edit approved by Kelsea Weber

Before
After
Unchanged

Step Lines

[* black] Insert the metal splunger beneatha '''plastic''' spudger or similar pry tool, beneath the keyboard, near the "insert" key, and pop the keyboard up from the laptop.
[* icon_caution] When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
[* black] Insert the metal splunger beneatha '''plastic''' spudger or similar pry tool, beneath the keyboard, near the "insert" key, and pop the keyboard up from the laptop.
[* icon_caution] When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
[* black] Starting at the opening you just created, run your fingers around the outside of the keyboard separating it from the rest of the computer.
[* icon_caution] Only lift the keyboard up a few inches because it is attached to the laptop by a ribbon cable.