Skip to main content

Changes to Step #4

Edit by Miroslav Djuric

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] We already took apart the iPad during [guide|5071|the teardown], so here's a peek of all the fun stuff from the inside...
[* red] The sleep sensor. This is the little sensor that reacts to the Smart Cover's round magnet for turning on/off the iPad 2's screen.
[* yellow] This row of magnets clamps the Smart Cover tightly to the iPad 2 (on the right side). Note that the magnets have their polarity displayed, and that they alternate in polarity: + - + - .
[* black] The alternating polarity of the magnets in the iPad 2 is complemented by the opposite alternating polarity of the magnets in the Smart CoverCover (- + - +), ensuring that the Smart Cover always sits in the same orientation.
[* black] The alternating polarity of the magnets in the iPad 2 is complemented by the opposite alternating polarity of the magnets in the Smart CoverCover (- + - +), ensuring that the Smart Cover always sits in the same orientation.