Skip to main content

Changes to Step #2

Edit by Zack Hoover

Edit approved by Zack Hoover

Deleted
Added
Unchanged

Step Lines

[* red] Locate the copper-colored ribbon cables connecting the HERO Port to the motherboard.
[* black] UsingTo remove the connector, use tweezers or a thin spudger spudger, pry up oneach side of the black rectangle to detach it fromconnector. Then, lift the boardconnector straight up from it's socket.
[* black] UsingTo remove the connector, use tweezers or a thin spudger spudger, pry up oneach side of the black rectangle to detach it fromconnector. Then, lift the boardconnector straight up from it's socket.
[* icon_note] When reassembling this piece, do not use too much force to put the black rectangular pins back onto the motherboard. When done right, there will be a 'click'.