Skip to main content

Changes to Step #2

Edit by Zack Hoover

Edit approved by Zack Hoover

Deleted
Added
Unchanged

Step Lines

[* red] Locate the copper-colored ribbon cables connecting the HERO Port to the motherboard.
[* black] Using a thin spudger or fingernailspudger, pry up on the black rectangle to detach it from the board.
[* black] Using a thin spudger or fingernailspudger, pry up on the black rectangle to detach it from the board.
[* icon_note] When reassembling this piece, do not use too much force to put the black rectangular pins back onto the motherboard. When done right, there will be a 'click'.