Skip to main content

Changes to Step #2

Edit by Geoff Wacker

Edit approved by Geoff Wacker

Deleted
Added
Unchanged

Step Lines

[* red] Locate the copper-colored ribbon cables connecting the HEROHero Port to the motherboard.
[* red] Locate the copper-colored ribbon cables connecting the HEROHero Port to the motherboard.
[* black] To remove the connector, use tweezers or a spudger, pry up each side of the connector. Then, lift the connector straight up from it's socket.
[* icon_note] When reassembling this piece, do not use too much force to put the black rectangular pins back onto the motherboard. When done right, there will be a 'click'.

Image 1

Old Version

New Version