Skip to main content

Changes to Step #1

Edit by Geoff Wacker

Edit approved by Geoff Wacker

Deleted
Added
Unchanged

Step Lines

[* black] There arered] Remove the three 8mm8 mm Phillips #000 screws securing the Hero port to the motherboard.
[* red] Remove these screws and set them aside for reassembly. They are marked in red.
[* icon_note] Use the J000 Philips Head.
[* black] There arered] Remove the three 8mm8 mm Phillips #000 screws securing the Hero port to the motherboard.
[* red] Remove these screws and set them aside for reassembly. They are marked in red.
[* icon_note] Use the J000 Philips Head.

Image 1

Old Version

New Version