Skip to main content

Changes to Step #1

Edit by Omar Abdullah

Edit approved by Omar Abdullah


Step Lines

-[* black] Make sure you gently unplug the cord before you remove the battery.
+[* icon_note] There are two screws on the rare case of the device. For the one shown in blue marker requires either an extended screwdriver or putting on a little pressure on a regular screwdriver.
+[* black] Remove the two 9mm Phillips #1 screws from the rare case of the device.
+[* icon_caution] If you cannot remove the screw with low pressure, do not use high pressure to remove it. It may cause a damage on the device case. Use an extended screwdriver instead.