Skip to main content

Changes to Step #3

Edit by Geoff Wacker

Edit approved by Geoff Wacker

Before
After
Unchanged

Step Lines

-[* red] Remove the screws using the T8 screwdriver. TORQ screws are of length 6MM.
+[* red] Remove the thirteen 6 mm Torx T8 screws.
[* icon_note] Some screws have plastic covers over them that need to be pried out before the screws can be removed.
-[* orange] Screw are removed with the Phillips 1 screwdriver and have a Phillips head and length 7mm.
-[* yellow] These screws are spring loaded with a Phillips head and are not completely removed.
+[* orange] Remove the single 7 mm Phillips #1 screw.
+[* yellow] Loosen the two Phillips #1 screws. These screws will remain captive to the device.