Skip to main content

Changes to Step #3

Edit by waltergg

Edit approved by Adam O'Camb


Step Lines

[* red] Remove the thirteen 6 mm Torx T8 screws.
[* icon_note] Some screws have plastic covers over them that need to be pried out before the screws can be removed.
+[* green] Remove the Five Torx M2.5x5 screws.
[* orange] Remove the single 7 mm Phillips #1 screw.
[* yellow] Loosen the two Phillips #1 screws. These screws will remain captive to the device.

Image 1

Old Version

New Version