Skip to main content

Changes to Step #2

Edit by Hemish Patel

Edit approved by Hemish Patel

Before
After
Unchanged

Step Lines

[* red] Using a Phillips #2 screwdriver, untighten the 1/4'' screw from underneath the fan blade.
[* icon_caution] Blade may be sharp so watch out!
[* black] Pull ofCautiously remove the blade carefullyfrom the hinge.
[* icon_note] Put''Put the screws in a cup so you don't lose them!them!''
[* black] Pull ofCautiously remove the blade carefullyfrom the hinge.
[* icon_note] Put''Put the screws in a cup so you don't lose them!them!''