Skip to main content

Changes to Step #2

Edit by Hemish Patel

Edit approved by Hemish Patel

Before
After
Unchanged

Step Lines

[* red] Untighten the 1/4 mmUsing a Phillips #2 screwdriver, untighten the 1/4'' screw from underneath the fan blade. Hold the fan blade to make it easier.
[* red] Untighten the 1/4 mmUsing a Phillips #2 screwdriver, untighten the 1/4'' screw from underneath the fan blade. Hold the fan blade to make it easier.
[* icon_caution] Blade may be sharp so watch out!
[* black] Pull of the blade carefully.
[* icon_note] Put the screws in a cup so you don't lose them!