Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #8

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* black] After removingWith the 3D Touch sensor arrayback half of the display assembly dispatched, we set to work separatingremoving the display from the front glass.
[* blackicon_note] This particular machine uses a vacuum to secure the iPhone's glass to a heated surface. This process helps to weaken the optically clear adhesive (OCA) that secures the glass to the actual display.
[* black] After removingWith the 3D Touch sensor arrayback half of the display assembly dispatched, we set to work separatingremoving the display from the front glass.
[* blackicon_note] This particular machine uses a vacuum to secure the iPhone's glass to a heated surface. This process helps to weaken the optically clear adhesive (OCA) that secures the glass to the actual display.
[* black] Once the OCA had been sapped of its sticky strength, a .08 mm molybdenum wire makes short work of fully separating the LCD from the glass panel.