Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #8

Edit by Andrew W.

Edit approved by Andrew W.

Before
After
Unchanged

Step Lines

[* black] After removing the 3D Touch sensor array we set to work separating the display assembly from the front glass.
[* black] Using a combination of heat and pressure,This particular machine uses a vacuum to secure the screen is heldiPhone's glass to the machine whileheated surface. This process helps to weaken the OCA (opticallyoptically clear adhesive) is subjectedadhesive (OCA) that secures the glass to firethe actual display.
[* black] Once the OCA hashad been sufficiently melted the display assembly was scalped from the front glass usingsapped of its sticky strength, a .01 mm01mm molybdenum wirewire made short work of fully separating the display and glass.
[* black] Using a combination of heat and pressure,This particular machine uses a vacuum to secure the screen is heldiPhone's glass to the machine whileheated surface. This process helps to weaken the OCA (opticallyoptically clear adhesive) is subjectedadhesive (OCA) that secures the glass to firethe actual display.
[* black] Once the OCA hashad been sufficiently melted the display assembly was scalped from the front glass usingsapped of its sticky strength, a .01 mm01mm molybdenum wirewire made short work of fully separating the display and glass.