Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Finally, use the flat end of a spudger to disconnect the display datadigitizer cable connector.
[* black] When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|29363|disconnect and reconnect the battery connector|stepid=69537].
[* black] Finally, use the flat end of a spudger to disconnect the display datadigitizer cable connector.
[* black] When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|29363|disconnect and reconnect the battery connector|stepid=69537].