Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #8

Edit by Rachel Wooley

Edit approved by Rachel Wooley

Before
After
Unchanged

Step Lines

[* icon_caution] Getblack] Using a firm hold on both sides of the camcorder andcamcorder, gently pull apart. It should come apart easily, but if it does not then go back through the steps to make sure you removed each screw.
[* black] Pressure
two halves. Pressure should be evenly distributed across entire device.
[* icon_note] If the camcorder does not come apart easily, double check that all of the screws are removed. Return to the previous steps for screw removal if you find a screw that is still attached.
[* icon_caution] Getblack] Using a firm hold on both sides of the camcorder andcamcorder, gently pull apart. It should come apart easily, but if it does not then go back through the steps to make sure you removed each screw.
[* black] Pressure
two halves. Pressure should be evenly distributed across entire device.
[* icon_note] If the camcorder does not come apart easily, double check that all of the screws are removed. Return to the previous steps for screw removal if you find a screw that is still attached.