Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Ritchie

Pending approval

Before
After
Unchanged

Step Lines

[* black] Use your fingernail or the flat edge of a spudger to carefully flip up the upper LCD ribbon cable retaining flap. The retaining flap is the black plastic clip. It is hinged at the back so should be opened from the front as shown.
[* black] Use your fingernail or the flat edge of a spudger to carefully flip up the upper LCD ribbon cable retaining flap. The retaining flap is the black plastic clip. It is hinged at the back so should be opened from the front as shown.
[* icon_caution] Make sure you are flipping up the retaining flap, '''not''' the socket itself.
[* black] Pull the motherboard away from the DS Lite to separate the upper LCD ribbon cable from its socket on the motherboard.
[* black] Remove the motherboard from the DS Lite.