Skip to main content

Changes to Step #7

Edit by Angelo

Edit approved by Angelo

Deleted
Added
Unchanged

Step Lines

[* red] Remove the 3.5mm screw located on the backside of the camera, tothat sits to the left of the viewfinder, and above the LCD screenscreen, on the backside of the camera.
[* red] Remove the 3.5mm screw located on the backside of the camera, tothat sits to the left of the viewfinder, and above the LCD screenscreen, on the backside of the camera.
[* blue] Remove the second 3.5mm screw directly above the LCD screen.
[* yellow] Next to the screw is a ribbon cable. Gently remove this ribbon cable from the connector.