Skip to main content

Changes to Step #5

Edit by Angelo

Edit approved by Angelo

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Do not remove the metal plate this step refers to. Removal at this step may damage the ribbon cable. Wait until the next step to remove the plate.
[* red] Remove the 3.5 mm screw that sits on the metal plate at the bottom of the camera.
[* blue] Remove the two other 3.5 mm screws that sit on the side, to the left of the screw you just removed.
[* icon_note] The screws inIn the imageimage, we have already been removedremoved some of the screws.
[* icon_note] The screws inIn the imageimage, we have already been removedremoved some of the screws.