Skip to main content

Changes to Step #5

Edit by Angelo

Edit approved by Angelo

Deleted
Added
Unchanged

Step Lines

[* icon_cautionicon_note] Do not remove the metal plate described in this step. The ribbon cablestep refers to; removal at this step may suffer damagedamage the ribbon cable. Wait until the next step seven to remove the plate.
[* red] Locate the metal plate onat the bottom of the camera. Remove the 3.5mm connecting3.5 mm screw.
[* blue] OnRemove the two other 3.5mm screws that sit on the sideside, to the left of the screw you just removed there are two more 3.5mm screws; remove them. Note: theremoved.
[* icon_reminder] The
screws in the image are already removed.
[* icon_cautionicon_note] Do not remove the metal plate described in this step. The ribbon cablestep refers to; removal at this step may suffer damagedamage the ribbon cable. Wait until the next step seven to remove the plate.
[* red] Locate the metal plate onat the bottom of the camera. Remove the 3.5mm connecting3.5 mm screw.
[* blue] OnRemove the two other 3.5mm screws that sit on the sideside, to the left of the screw you just removed there are two more 3.5mm screws; remove them. Note: theremoved.
[* icon_reminder] The
screws in the image are already removed.