Skip to main content

Changes to Step #5

Edit by Justin

Pending approval

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Do not remove the metal plate described in this step. The ribbon cable may suffer damage. Wait until step sixseven to remove the plate.
[* blackred] Locate the metal plate on the bottom of the camera. Remove the screw3.5mm connecting the plate to the camerascrew.
[* blackblue] On the side to the left of the screw you just removed there are two more 3.5mm screws; remove them. Note: the screws in the image are already removed.
[* icon_caution] Do not remove the metal plate described in this step. The ribbon cable may suffer damage. Wait until step sixseven to remove the plate.
[* blackred] Locate the metal plate on the bottom of the camera. Remove the screw3.5mm connecting the plate to the camerascrew.
[* blackblue] On the side to the left of the screw you just removed there are two more 3.5mm screws; remove them. Note: the screws in the image are already removed.

Image 1

Old Version

New Version