Skip to main content

Changes to Step #1

Edit by Angelo

Edit approved by Angelo

Deleted
Added
Unchanged

Step Lines

[* icon_note] Unless stated otherwise, use a Phillips #00 screwdriver to remove all screws.
[* red] RemoveOn the backside of the camera, remove the 4.75 mm screw that sits at the top right corner, on the backside of the cameracorner.
[* red] RemoveOn the backside of the camera, remove the 4.75 mm screw that sits at the top right corner, on the backside of the cameracorner.
[* yellow] Remove the four 4.75 mm screws that sit at the bottom of the camera.