Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #26

Edit by Paige Reisman

Edit approved by Paige Reisman

Before
After
Unchanged

Step Lines

[* black] Finally, with most of the adhesive loosened, slideSlide an opening card underneath the center of the motherboard.
[* black] Push the card
motherboard, pushing it as far backin as it will go, thengo.
[* black] Slowly
pry the entire motherboard up.
[* icon_caution] If any partportion of the motherboard requires excessive force to pry up, stop prying and insteadre-apply the iOpener and return to the corresponding step corresponding to that portion offurther loosen the motherboardadhesive.
[* black] Finally, with most of the adhesive loosened, slideSlide an opening card underneath the center of the motherboard.
[* black] Push the card
motherboard, pushing it as far backin as it will go, thengo.
[* black] Slowly
pry the entire motherboard up.
[* icon_caution] If any partportion of the motherboard requires excessive force to pry up, stop prying and insteadre-apply the iOpener and return to the corresponding step corresponding to that portion offurther loosen the motherboardadhesive.