Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #24

Edit by Paige Reisman

Edit approved by Paige Reisman

Before
After
Unchanged

Step Lines

[* black] Insert the opening tool underneathon the other side of the rectangular cut out.
[* black] Pry
out on the upper portion of the motherboard and pry it up.
[* black] SlideWhile keeping the opening tool downunderneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener
.
[* black] Insert the opening tool underneathon the other side of the rectangular cut out.
[* black] Pry
out on the upper portion of the motherboard and pry it up.
[* black] SlideWhile keeping the opening tool downunderneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener
.