Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #23

Edit by Scott Havard —

Edit approved by Scott Havard

Before
After
Unchanged

Step Lines

[* black] Insert a plastic opening tool underneath the motherboardlogic board, inside the rectangular cut out, and gently pry the motherboardlogic board up.
[* black] Slide the opening tool down the length of the gap while continuing to pry the motherboardlogic board up.
[* black] Insert a plastic opening tool underneath the motherboardlogic board, inside the rectangular cut out, and gently pry the motherboardlogic board up.
[* black] Slide the opening tool down the length of the gap while continuing to pry the motherboardlogic board up.
[* icon_caution] Lift the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.