Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #17

Edit by Paige Reisman

Edit approved by Paige Reisman

Before
After
Unchanged

Step Lines

[* black] start peelinicon_note] The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.
[* black] Insert an opening pick under the Lightning cable where it meets the logic board.
[* black] Slide the opening pick towards towards the bend in the cable.
[* black] start peelinicon_note] The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.
[* black] Insert an opening pick under the Lightning cable where it meets the logic board.
[* black] Slide the opening pick towards towards the bend in the cable.